View LMD300-0040-C900-7030000_8914832.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

clm-ds14 rev 3k cree ? lmd300, lmd400 & lmd600 led module drivers pro duc t d escrip tion cree l e d modules provide lighting designers and manufacturers with simple, easy-to-adopt l e d lighting solutions that reduce luminaire development time and speed time-to-market. cree lmd300, lmd400 and lmd600 l e d module drivers are specifcally designed to work with the cree lmh2 2000-, 3000 -, 4000- and 6000 - lumen light sources to jump- start the design process for recessed downlights, wall sconces or pendant lights in demanding end markets such as retail, museums, hospitality and restaurants. fe atures ? input voltage options: 100?240?v, 100?277?v, 120?277?v & 220?240?v ? 0/1? 10?v dimming support for 100?240?v, 100?277?v, 120?277?v & 220?240?v options ? dali + touch dimming support for 220?240?v option ? optimized for cree lmh2 2000 -, 3000- 4000- and 6000-lm light sources ? lmd400 enables california title 24 compliance t able o f cont e nts order codes ................................................. 2 characteristics - lmd300 100- to 240 -v 0/1? 10?v dimming driver ............................ 2 characteristics - lmd300 120- to 277 -v 0/1? 10?v dimming driver ............................ 3 characteristics - lmd300 220- to 240 -v 0/1? 10?v dimming driver ............................ 3 characteristics - lmd300 220- to 240 -v dali + touch dimming driver .................... 4 characteristics - lmd400 120- to 277 -v 0/1? 10?v dimming driver ............................ 4 characteristics - lmd600 100- to 277 -v 0/1? 10?v dimming driver ............................ 5 dimming ...................................................... 6 mechanical dimensions ............................. 7 wiring diagrams ....................................... 10 thermal design ........................................ 13 e mergency battery operation ................. 13 safety and regulatory notes ................... 14 packaging ................................................. 16 led mo dule drive r d ata sheet copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www. cr ee. c om/x lamp
2 o rde r codes lmd300 nominal input voltage (v a c) frequency (hz) t ypical o utput current (ma) dimming o rder code 100-240 50/60 900 0/1?10?v lmd300-0040-c900-8030000 120-277 50/60 900 0/1?10?v LMD300-0040-C900-7030000 220-240 50/60 900 0/1?10?v lmd300-0040-c900-2030000 220-240 50/60 900 dali + touch lmd300-0040-c900-2020000 lmd400 nominal input voltage (v a c) frequency (hz) t ypical o utput current (ma) dimming o rder code 120-277 50/60 940 0/1?10?v lmd400-0048-c940-7030000 lmd600 nominal input voltage (v a c) frequency (hz) t ypical o utput current (ma) dimming o rder code 100-277 50/60 1700 0/1?10?v lmd600-0100-c1a7-7030000 chara c teristic s - lmd300 100- to 240 - v 0/1-10?v di mm ing driver order code: lmd300-0040-c900-8030000 characteristics unit minimum t ypical maximum input voltage range v ac 90 264 input power w 40 output current ma 900 output voltage v 40 driver effciency (@ 55?c) ? with lmh2 2000?lm light source % 85 driver effciency (@ 55?c) ? with lmh2 3000?lm light source % 86 power factor - with lmh2 2000 - lm light source 0.95 power factor - with lmh2 3000 - lm light source 0.95 le d driver case temperature c 0 70 ? 3? d models (.step fles) for the lmd300 led module drivers are available on the cree website by selecting the documentation tab on the lmh2 product page . copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
3 chara c teristic s - lmd300 120- to 277 - v 0/1-10?v di mm ing driver order code: LMD300-0040-C900-7030000 crer m m input voltage range v ac 108 305 input power w 40 output current ma 900 output voltage v 40 driver effciency (@ 55?c) ? with lmh2 2000?lm light source % 85 driver effciency (@ 55?c) ? with lmh2 3000?lm light source % 86 power factor - with lmh2 2000 - lm light source 0.95 power factor - with lmh2 3000 - lm light source 0.95 dimming current @ 120?v ma 2.3 dimming current @ 277?v ma 2.3 le d driver case temperature c 0 70 ? 3? d models (.step fles) for the lmd300 led module drivers are available on the cree website by selecting the documentation tab on the lmh2 product page . chara c teristic s - lmd300 220- to 240 - v 0/1-10?v di mm ing driver order code: lmd300-0040-c900-2030000 crer m m input voltage range v ac 207 230 264 input power w 40 output current ma 900 output voltage v 39 driver effciency (@ 55?c) ? with lmh2 2000?lm light source % 85 driver effciency (@ 55?c) ? with lmh2 3000?lm light source % 86 power factor - with lmh2 2000 - lm light source 0.95 power factor - with lmh2 3000 - lm light source 0.95 le d driver case temperature c 0 70 ? 3? d models (.step fles) for the lmd300 led module drivers are available on the cree website by selecting the documentation tab on the lmh2 product page . copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
4 chara c teristic s - lmd300 220- to 240 - v d ali + t ou c h dimm ing driver order code: lmd300-0040-c900-2020000 crer m m input voltage range v ac 207 230 264 input power w 40 output current ma 900 output voltage v 39 driver effciency (@ 55?c) ? with lmh2 2000?lm light source % 81 driver effciency (@ 55?c) ? with lmh2 3000?lm light source % 85 power factor - with lmh2 2000 - lm light source 0.95 power factor - with lmh2 3000 - lm light source 0.95 le d driver case temperature c 0 70 ? 3? d models (.step fles) for the lmd300 led module drivers are available on the cree website by selecting the documentation tab on the lmh2 product page . chara c teristic s - lmd400 120- to 277 - v 0/1-10?v di mm ing driver order code: lmd400-0048-c940-7030000 crer m m input voltage range v ac 108 305 input power w 48 output current ma 940 output voltage v 22-44 driver effciency (@ 55?c) ? with lmh2 2000?lm light source % 85 driver effciency (@ 55?c) ? with lmh2 3000?lm light source % 86 driver effciency (@ 55?c) ? with lmh2 4000?lm light source % 87 power factor - with lmh2 2000 - lm light source 0.95 power factor - with lmh2 3000 - lm light source 0.95 power factor - with lmh2 4000 - lm light source 0.95 dimming current @ 120?v ma 2.3 dimming current @ 277?v ma 2.3 le d driver case temperature c 0 90 ? 3? d models (.step fles) for the lmd400 led module driver are available on the cree website by selecting the documentation tab on the lmh2 product page . copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
5 chara c teristic s - lmd600 100- to 277 - v 0/1-10?v di mm ing driver order code: lmd600-0100-c1a7-7030000 characteristics unit minimum t ypical maximum input voltage range v ac 90 305 input power w 102 output current ma 1700 output voltage v 25-52 driver effciency (@ 55?c) ? with lmh2 6000?lm light source % 87 power factor - with lmh2 6000 - lm light source 0.95 dimming current @ 120?v ma .05 dimming current @ 277?v ma .05 le d driver case temperature c 0 76 ? 3? d models (.step fles) for the lmd600 led module driver are available on the cree website by selecting the documentation tab on the lmh2 product page . copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
6 dimming the lmh2 2000-, 3000 - and 4000- lm light sources can use the lmd300 le d module driver with either dali + touch dimming or 0/1- 10?v dimming and use the lmd400 led module driver with 0/1 ? 10?v dimming. the lmh2 6000?lm light source can use the lmd600 led module driver with 0/1 ?10?v dimming. driver i nput voltage dimming lowest light level lmd300-0040-c900-8030000 100?240?v 0/1?10?v 10% LMD300-0040-C900-7030000 120?277?v 0/1?10?v 10% lmd300-0040-c900-2030000 220?240?v 0/1?10?v 10% lmd300-0040-c900-2020000 220?240?v dali + touch 10% lmd400-0048-c940-7030000 120?277?v 0/1?10?v 10% lmd600-0100-c1a7-7030000 100?277?v 0/1?10?v 1% the lmh2 2000, 3000? and 4000?lm light sources combined with the lmd300 dali + touch driver is a dali?certifed device for use with dali -compliant dimmers. caution - dali dimming and touch dimming should not be used on the same luminaire. setting up the lmd300 d ali + t ouch driver in t ouch control mode the lmd300 dali + touch driver can be used in touch control mode in installations where dali control is not installed. to set up touch control mode, wire the driver dali terminals to 220 ? to 240?vac mains power through a pushbutton (a momentary switch rated for 220 to 240?vac and 0.5?a) as shown in the wiring diagrams section of this data sheet. multiple lmh2 modules can be connected together to be controlled by the same pushbutton. to activate touch control mode, turn on power to the lmh2 l e d module without pressing the pushbutton, i.e., the switch is open. after one (1) second, the driver automatically enters touch control mode and the pushbutton can then be used to control the lmh2. t ouch control mode o peration in touch control mode, a single pushbutton turns the lmh2 l e d module on and off and changes its brightness. to turn the module on or off, press and release the pushbutton quickly (in less than 300?ms). when the module is on, change its brightness by pressing and holding the pushbutton. the brightness alternately increases or decreases each time the pushbutton is pressed and held. when the desired brightness is reached, release the pushbutton. the module will remain at this brightness level until the pushbutton is pressed and held again, even if it is turned off and back on. two methods can be used to quickly reach maximum and minimum brightness. for maximum brightness instantly, double-click the pushbutton when the lmh2 l e d module is on. double-clicking means quickly pressing and releasing the pushbutton twice in succession (with less than 300?ms between presses). for minimum brightness, press and hold the pushbutton when the lmh2 is off. the lmh2 led module turns on at minimum brightness and increases in brightness until the pushbutton is released. if multiple lmh2 l e d modules are controlled by the same pushbutton, the modules can lose synchronization and not all perform the same action in response to the pushbutton. to synchronize all the modules connected to one pushbutton, press and hold the pushbutton copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
7 for at least one (1) second and release it, then double ? click the pushbutton. all connected modules will then be on at maximum brightness, regardless of their previous states. touch control mode operation is summarized in the following table. pushbutton o peration module o peration in t ouch mode module on module off click all off all on at previous brightness press and hold brightness increases or decreases opposite of previous press and hold all on at minimum brightness, increasing brightness while pushbutton held double-click all on at maximum brightness mech anical dimensions physical characteristics of the lmd300, lmd400 & lmd600 drivers physical characteristic lmd300 100- to 240-v driver lmd300 120- to 277-v driver lmd300 220- to 240-v drivers lmd400 120- to 277-v driver lmd600 100- to 277-v driver weight (g) 195 195 264 280 440 maximum height (mm) 37.5 37.5 35 37.5 47 maximum length (mm) 90 90 205 90 160 maximum width (mm) 90 90 80 90 63 lmd300 100- to 240 - v and lmd300 & lmd400 120- to 277-v drivers 1 1 dimensions for all the diagrams are in mm and are for reference only. for exact dimensions and tolerances, refer to the 3 ? d models (.step fles) for the lmd300, lmd400 and lmd600 drivers available by selecting the documentation tab on the lmh2 product page . 40 20 431.8 45 7.5 30 30 7.5 37.5 8 7 6 5 4 tc location m3 or #6 mounting slot typ 2x 76.6 90 90 76.6 wire routing slot typ 9x 180 10 stripped 10 copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
8 lmd300 220- to 240-v driver - with s tandard covers lmd300 220- to 240-v driver - with o ptional conduit covers 50 185 80 35 typ 2x m3 or #6 mounting slot tc location 196 205 80 50 185 80 35 typ 2x m3 or #6 mounting slot tc location 196 205 80 80 50 185 40 35 m3 or #6 mounting slot typ 2x 205 196 80 20 knockout typ 4x 80 50 185 40 35 m3 or #6 mounting slot typ 2x 205 196 80 20 knockout typ 4x 80 50 185 40 35 m3 or #6 mounting slot typ 2x 205 196 80 20 knockout typ 4x copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
9 lmd600 100- to 277-v driver 50 23 wire l = 150mm typ. 8 tc 6-32 mounting studs 61.6 50.8 160 14.4 39 63 47 50 23 wire l = 150mm typ. 8 tc 6-32 mounting studs 61.6 50.8 160 14.4 39 63 47 copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
10 wiring diagra ms electrical connection for the 100- to 240 -v , 100- to 277 -v and 120- to 277-v le d module drivers, lmh2 le d module operation is accomplished by connecting the ac mains to the two (2) lead wires (line and neutral) from the driver and connecting the driver output wires to the input leads on the cree lmh2 light source, as indicated in the following wiring diagrams. for the 220- to 240 -v le d module drivers, module operation is accomplished by connecting the ac mains to the appropriate terminal block pins. the 100 ? to 240?v and 120? to 277?v led module driver lead wires are 152.4?mm long, 18?awg with the ends stripped 10?mm. the 100? to 277?v led module driver lead wires are 150?mm long, 18?awg with the ends stripped 10?mm. the 220 ? to 240?v led module drivers have poke -in terminals. lmd300 100- to 240 - v driver t o l ig h t s o u r c e 0 /1 -1 0 v c o n t r o l w h t - n e u b l k - h o t b l k r e d t o l ig h t s o u r c e w h t - n e u b l k - h o t b l k r e d v io g r y v io g r y copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
11 lmd300 & lmd400 120- to 277 - v drivers lmd300 220- to 240 -v 0/1?-?10?v and d ali + t ouch dimming drivers - t ouch o peration not r equired lmd300/ lmd400 lmd300/ lmd400 lmd300 lmd300 lmd300 lmd300 lmd300 lmd300 to dali bus or 0/1-10 v copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
12 lmd300 220- to 240-v d ali + t ouch driver lmd600 100- to 277 - v driver lmd300 lmd300 lmd300 lmd300 lmd300 lmd300 copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
13 wiring s train relief lmd300, lmd400 and lmd600 l e d module drivers must not be suspended directly by the leads. though the wiring from the lmd300, lmd400 and lmd600 l e d module drivers is internally strain relieved, additional strain relief methods must be employed if the luminaire is to be suspended solely by the wiring, as in a pendant luminaire. therm al design expected lmd300 lifetime versus t emperature at t c point expected o peration life (hours) t c (c) @ 25?c room a mbient lmd300 100- to 240-v 0/1-10?v dimming driver lmd300 120- to 277-v 0/1-10?v dimming driver lmd300 220- to 240-v 0/1-10?v dimming driver lmd300 220- to 240-v d ali + t ouch dimming driver 35,000 70 70 70 70 50,000 65 65 65 65 expected lmd400 lifetime versus t emperature at t c point expected o peration life (hours) t c (c) @ 25?c room a mbient lmd400 120- to 277-v 0/1-10?v dimming driver 35,000 90 50,000 80 expected lmd600 lifetime versus t emperature at t c point expected o peration life (hours) t c (c) @ 25?c room a mbient lmd600 100- to 277-v 0/1-10?v dimming driver 50,000 76 emergenc y battery o peration the lmd300, lmd400 and lmd600 l e d module drivers are constant- current supplies. interrupting the driver current with a battery supply is an acceptable method of emergency or power outage operation. an acceptable installation should also include a switching mechanism that prevents the battery power from entering the driver through the dc output leads. confrming backup power supply compatibility is the responsibility of the luminaire manufacturer or installer. please refer to the backup power supply manufacturers instructions for installation and further product information. copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
14 s afety and regul atory n otes the following tables show the safety and regulatory certifcations for the lmd300 and lmd400 led module drivers. lmd300 100- to 240 -v a c driver s tandard file number safety j61347?1 (h20) cjp2012109004-0578 j61347?1 (h21) en 61347-1 cjp2012109004-0578 en 61347-2-13 ce sel v equivalent ip-20 e lectromagnetic compatibility en 55015 cjp2012109004-0578 iec 61000-3-2 iec 61000-3-3 iec 61547 e nvironmental rohs lmd300 & lmd400 120- to 277 -v a c drivers lmd300 220- to 240 -v a c driver s tandard file number s tandard file number safety ul ? /cul recognized (ul8750) e333437 class 2 power supply ul C damp rated air handling (plenum) 5va fame rating en 61347-1 rzc e2012-0221l vd 101342922chi-001 en 61347-1 rzc e2012-0205l vd rzc e2012-0512l vd rzc e2012-0574l vd-m1 en 61347-2-13 en 61347-2-13 ce sel v equivalent ce sel v equivalent ip-20 ip-20 e lectromagnetic compatibility en 55015 rzc e2012-0221emc r10051625-emc en 55015 rzc e2012-0205emc rzc e2012-0512emc rzc e2012-0574emc-m1 iec 61000-3-2 iec 61000-3-2 iec 61000-3-3 iec 61000-3-3 iec 61547 iec 61547 fcc 47 cfr part 15 class b/ ices 03 regulatory ieee c.62.41? 1991 class a (surge) ne ma 410 e nvironmental rohs rohs copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
15 lmd600 100- to 277 -v a c driver s tandard file number safety ul/cul recognized (ul8750) e333437 class 2 power supply ul C damp rated air handling (plenum) 5va fame rating en 61347-1 101564185chi-001 en 61347-2-13 ce sel v equivalent ip-20 e lectromagnetic compatibility en 55015 r10273893-emc iec 61000-3-2 iec 61000-3-3 iec 61547 fcc 47 cfr part 15 class b/ ices 03 e nvironmental rohs s afety certifcation together, the lmh2 light source combined with the lmd300, lmd400 or lmd600 l e d module driver is suitable for damp locations; covered ceilings. final luminaire designs should go through safety certifcation as required, which is the responsibility of the luminaire manufacturer. copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers
16 p a c kaging lmd300 100- to 240C v le d module drivers are packaged in boxes of 10, which are then combined in cartons of 5 boxes, or 50 lmd300 120- to 240C v drivers. lmd300 and lmd400 120- to 277C v le d module drivers are packaged in boxes of 10, which are then combined in cartons of 5 boxes, or 50 lmd300 or lmd400 120- to 277C v drivers. lmd300 220- to 240 -v le d module drivers are packaged in boxes of 5, which are then combined in cartons of 10 boxes, or 50 lmd300 220- to 240 -v drivers. lmd600 100- to 277C v le d module drivers are packaged in boxes of 5, which are then combined in cartons of 5 boxes, or 25 lmd600 100- to 277C v drivers. box and carton sizes are as follows. box of 10 lmd300 100- to 240- v le d module drivers: 255 x 194 x 98 mm carton of 5 lmd300 100- to 240- v driver boxes: 509 x 275 x 222 mm box of 10 lmd300 or lmd400 120- to 277- v le d module drivers: 255 x 194 x 98 mm carton of 5 lmd300 or lmd400 120- to 277- v driver boxes: 509 x 275 x 222 mm box of 5 lmd300 220- to 240 -v le d module drivers: 285 x 211 x 91 mm carton of 10 lmd300 220- to 240 -v driver boxes: 588 x 471 x 243 mm box of 5 lmd600 100- to 277 -v le d module drivers: 490 x 235 x 90 mm carton of 5 lmd600 100- to 270 -v driver boxes: 510 x 510 x 255 mm copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. lmd300, lmd400 & lmd600 led mo dule drivers

▲Up To Search▲

Price & Availability of LMD300-0040-C900-7030000

	To Download LMD300-0040-C900-7030000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .